Enter the tank size:
=============================Please enter the following================================
Tank width
(cm) Tank depth
(cm) Tank high
(cm) ，
From the tank surface water flooding to
cm， glass thickness
(mm) tank is sealed
What came into the type of bottom sand
Thickness "
cm (if the thickness of the election, please fill in the bottomless sand "0")
Your room temperature
You want to tank the room temperature
==========================The following are the results =============================
Capacity:
Your fish tank total capacity of water bodies
Liter (water)
Liter (L) has not yet filled with sand the end of the volume of water
Liter (L)
Bottom sand and glass fish tank less similar to the thickness of the water capacity (it is about the end of sand water approximation)
Liter (L)
Empty weight of cylinder filled with water
Kg
Bottom sand, weighing about
Kg
Fish tanks weight is estimated
Kg
Total weight of about
Kg
Lighting :
The amount of light required information:
Light applied to:
Ornamental fish use
W(watts)
Light applied to:
Plants growing negative
W(watts)
Light applies to:
Positive plants / coral
W (watts) (tank height in excess of 45CM., Recommend the use of halogen lamps)
According to John Fitch the tank light formula, the best lighting total power
W (W, Watts = 12.25 x Liters 0.46 is particularly suitable for medium-sized tank)
Filter:
Flow of the proposed filter
to
L / H (l / h), keeping some fish may have the highest
L / H (l / hour)
Heating:
1. According to a liter of water allocation from 1.5 to 2 vaga hot rod experience, you need constant stick to the fish tank
W
2. According to the joint surface, convective and radiant heat transfer empirical formula, you stick to the fish tank needs constant temperature
W
（Due to different indoor air convection intensity differences, if used on the filter, should be suitably increased, for reference only)
Stocking density recommendations:
Freshwater fish stocking density recommendations
Tropical fish stocking density recommendations